Data Sheets
GO Data Sheet PUMP 240V AC 100lpm PA2 150lpm PA3
GO Data Sheet PUMP 240V AC PA1 PA2 PA3 Detailed
GO Data Sheet Adam by Piusi Pump 240V AC Kit 60lpm DT6A04AAUSM61
Manuals
GO Manual Adam Piusi PA2 PA3

This kit comprises the following components:

 - SUCTION SPEAR - Telescopic Suction Spear and Drum / Tank Adaptor,

 - PUMP - 240V AC 70lpm PA1 Pump,

 - FILTER - FT10XA Particulate / Water Filter with pressure gauge,

 - METER - 3 Digit Mechanical Meter,

 - HOSE - 6m x 19mm ID Hose Scr Male BSP Ends,

 - SWIVEL - Dual Plane Swivel,

 - NOZZLE - Auto Shut Off Nozzle

Pump Information

Designed and manufactured by Adam Pump, a Piusi group company, in Italy, the PA1 240V 70lpm Pump, from GO Industrial, features a self-ventilated single phase, continuous duty  motor with IP55 protection, class F insulation and thermal overload protection engineered into the electric motor. 

Pump Features

• 240V AC - 2.4 amp
• Package dimension 290mm x 190mm x 210mm - 8.5kg
• Self-priming vane pump
• cast iron body
• sintered steel impeller
• acetal resin vanes
• integrated by-pass valve
• integrated stainless steel filter
• easily accessible ON-OFF switch,
• self-ventilated single phase motor
• IP55 protection
• class F insulation
• thermal overload protection engineered into the electric motor
• flow rate 70 l/min
• input/output 1”F BSP
• suitable for use with diesel fuel
• continuous duty design.

Filter Information

Designed and manufactured by Adam Pump, a Piusi group company, in Italy, the FT10XA Filter Kit, from GO Industrial, provides 30um Particulate and Water Filtration and is suitable to use in a diesel dispensing application up to 100lpm.  This filter kit features a Saturation Level Indicator Pressure Gauge 

Filter Features

• DN25 (1") Female BSP Inlet and Outlet
• 30um Particulate and Water Removal
• Flow Direction Cast on the Housing
• Saturation Level Indicator Pressure Gauge
• Flow Rate up to 100lpm
• Package Size 290mm L x 190mm H x 250mm W - 2.5kg

Meter Information

The TF3S1 3 Digit Mechanical Meter, from GO Industrial, is supplied with nutating disk for the high precision measurement of diesel fuel. The Meter is fitted with a totaliser, a counter, and a side knob for resetting the counter.  The fuel outlet direction can be adjusted according to the application at hand.  The Meter is also fitted with a calibration screw for precision adjustment. The meter can be mounted on electric pumps or used in gravity applications.

Meter Features

• made in Italy by Adam Pump, a Piusi Group Company
• partial 3-digit
• total 8-digit
• flow rate 20-120 l/min
• input/output 1 F BSP
• precision  1% >